In addition to the use of chemicals to remove the rust stains on the iron, the problems are easily and quickly eliminated with the products available at home.
How to Get Out With the Help of White Vinegar?
Necessary materials
- White vinegar
- That
- Aquarius
- Aluminum foil
Vinegar is a product used specifically to dissolve rust. The product, which will be used for a few hours as part of how to remove the rust stain on the iron, is dipped in white vinegar and then brush the rusty paste. If the iron or item used is too large to be dipped in vinegar, pour the upper part of it at a certain level and immerse the other side in the vinegar water. You can also wipe such materials with vinegared cloths. If you have rust stains on your steel-style products, wrap these products with aluminum. Brush it with a brush and vinegared water. In this way, no abrasion occurs and the steel is absolutely not damaged. Regular brushing of steel and other iron items prevents rust stains.
Try Salt and Lime
Necessary materials
- Salt
- Lime
- Lemon
- That
As part of how to clean the rusted iron, sprinkle salt so that the problem area is covered thoroughly and put lime on it. Put as much water as it can be put on it and let it sit in this way for 3 hours. Then brush thoroughly with the help of a brush. If there is lime, you can also use a mixture of salt and lemon.
Try Bread Water
Necessary materials
- That
- Bread
- Baking powder
- Scrub brush
Mix the bread with the water. Add the baking powder on it, mix well. Use this mixture to remove the rusty part from the iron. Spread the mixture on the iron thoroughly and let it sit in this way for a few hours. Then scrub with a stiff brush. It can be easily applied with the materials at home within the scope of how to clean rusty iron.
Try Dishwashing Liquid and Potatoes
Necessary materials
- Potato
- Dish soap
Cut the potato in half and pour dish soap over it. Put it on the problem area on the rusted iron and leave it on for a few hours. This application reacts with rust and eliminates the problem.
Other Practices That Removes Pass
Try Oxalitic Acid
Necessary materials
- Protective clothing
- Glove
- Glasses
- Oxalitic acid
Protective glasses, gloves and clothing are used to use this product. In order not to cause problems with the fumes of the acid, it should not be inhaled too much. To remove rust from the iron, definitely squeeze the liquid into this area. This liquid, which has a removal feature, should be mixed with water at the same rate. In order to remove rust from the iron, it is poured into the problem area and kept in this way. In this way, it is kept for 20 minutes. Then, the rust stain is thoroughly cleaned with a brush. After the rust stain is completely removed, it is absolutely necessary to rinse in order to remove the remover from the iron completely.
Try a Chemical Remover
Rust stains can also be removed with chemical solvents. However, when using these products, it should not be contacted with bare hands. The products that will be used to remove rust stains on the iron must be followed by reading the usage instructions. After the use of chemical products, brushing is always done with a brush. Thanks to brushing, rust stains are completely removed. The products to be used can be expensive. These products are used for both small and large items. When using it, attention must be paid to the details of the product and the instructions for use. Otherwise, it becomes inevitable to have health problems. People who will experience this problem may even be hospitalized.
Post a Comment