How To Clean Stains On Black Tiles?

Lime stains appear after a while on the dark colored tiles of lime water. A whitish stain causes a bad appearance.

How to Remove Lime Stains from Black Tiles

If the water is hard, lime stains often appear on dark colored tiles in the bathroom. The stains have a whitish appearance and are the stains on the tiles that do not come off when washed with normal water. It is possible to remove the lime stains by taking the detergents produced to remove the lime stains, and it is possible to get rid of these lime stains with the materials in your home.

• Sponge;
• Hard brush;
• Vinegar;
• Glove;
• Ammonia;
• Hot water;
• Microfiber cloth.

You should determine the amount of vinegar and ammonia yourself according to the number of tiles. Both should be the same amount. Wear rubber gloves to avoid hurting your hands. It should be poured into a small bucket and mixed. After wetting the tiles with hot water, the sponge should be soaked in the mixture and wetted, especially the stains should be cleaned by pressing. Before rinsing, brush the stains of a brush with a very hard brush. Wait for a while and rinse with hot water. Since it is important that the water never stays on the dark tiles, it should be dried with a microfiber cloth.

Thanks to the frequent cleaning of the bathroom with this mixture, plaque stains and matte appearance will not occur.

How to Clean Soap Stain From Black Tiles

• 1 cup of liquid dish soap;
• Rubber gloves;
• Sponge;
• Warm water;
• Microfiber cloth.

A large bucket is filled with warm water and a cup of liquid dishwashing detergent is added and mixed. Those with sensitive hands should always use gloves when cleaning to avoid irritation. The walls should be wiped down by dipping the sponge into the detergent water and wetting it. It should not be rinsed immediately, and after waiting for half an hour, wash with plenty of water. In order to prevent water from remaining and staining on the tiles, it must be dried.

Removing Mildew Stains From Black Tiles

• 1 liter of water;
• 1 tea glass of ammonia;
• Hard brush;
• Microfiber cloth;
• Spray bottle;
• Glove.

Among the reasons for the formation of mold stains, it will occur as a result of the steam remaining in the bathroom. It is important to ventilate it in order to prevent mold from forming on tiles. After mixing ammonia and warm water into warm water, spray it on the mildew after rinsing. Leave it on for half an hour. You should brush with a brush with very hard bristles until the mildew stains are removed. After washing with lukewarm water, dry it with a microfiber cloth.

Polishing Black Tiles

• 1 tea glass of lemon juice;
• 1 tea glass of vinegar;
• 1 liter of water;
• Spray bottle;
• Melamine sponge;
• Microfiber cloth;
• Glove.

You can try natural solutions to shine your dark tiles, which lose their shine due to soap or steam over time. For this, freshly squeezed lemon juice and vinegar are mixed in warm water and put into a spray bottle and sprayed on the tiles from 30 centimeters away. After waiting 10 minutes, it should be rinsed with warm water, then rubbed with a Melamine sponge and rinsed with warm water. You should dry it very carefully with a microfiber cloth to remove water stains.

How to Remove Black Stains on Tiles

• 1 tablespoon of baking powder;
• 4 tablespoons of vinegar;
• 5 tablespoons of ammonia;
• 1.5 liters of water;
• 7 tablespoons of soda;
• Glove;
• Sponge;
• Spray bottle;
• Microfiber cloth.

Be sure to start the mixture using gloves to avoid irritation on your hands. Vinegar, ammonia and soda should be mixed in the specified amount of warm water. When the soda is dissolved, the mixture will be ready. It should be placed in an empty spray bottle, shaken and first sprayed on the area of ​​the stains and kept for at least half an hour. After it is wiped with a sponge, it should be rinsed with warm water and dried with a cloth.

Preventing Black Tile Stain

Splashing water with chalky water on black tiles causes a bad appearance due to mold or fungus. There are detergents specially produced for cleaning tiles. The things you need to pay attention to in tile cleaning are as follows:

• After each bath, water should be washed on the walls so that the foam and soap wastes do not leave any traces;
• Drying with a paper towel prevents lime stains in the water;
• The stains should be rubbed with a sponge, after rinsing with water, they should be wiped with a microfiber cloth;
• In order to prevent mold or fungus growth, the ventilation window and door must be left open while taking a shower.

Melamine sponges are very effective in cleaning soap waste and mold in the bathroom drain. When cleaning the bathroom, it should be cleaned by choosing a melamine sponge. When not paying attention to the cleaning of the tiles that are not cleaned for a long time, it causes dust stains to accumulate.

Care should be taken to dust at regular intervals.

Among the most common causes of stains on black tiles, humidity, dirt accumulation, bacteria, steamy environment, and not cleaning for a long time.