Whether you're new to streaming or not, one of the best accessories to add to your streaming setup is a microphone stand. It doesn't just free your hands—although that's a wonderful bonus—but it greatly improves the quality of your content.
Holding the microphone or even having a headset introduces too much noise pollution, reducing the overall audio quality. By setting your microphone atop a microphone stand, it keeps the equipment nice and stable. Throw in a pop filter and shock mount, and what you get is audio quality so clean you can wash your hands with it.
Here are the best microphone stands for streaming available today.
1. Fifine T669 Microphone Kit
There’s nothing more stressful to an aspiring streamer than completing their streaming setup. Having the right software and hardware is bad enough, but now the microphone? Thankfully, everything you need for capturing high-quality audio is packaged in the Fifine T669 Microphone Kit.
Packaged inside is a T669 Microphone featuring a windscreen, shock mount, and a pop filter to capture the cleanest audio for your streams. There’s even a small knob on the side that really comes in handy for adjusting the volume on the fly.
Dig a bit further into the Fifine T669 Microphone Kit and you’ll find a well-constructed suspension arm featuring heavy-duty springs. Best of all, the microphone arm clamps to the edge of your desk, so not only is it ready in two minutes, there’s no need for any unnecessary holes.
2. Tonor T30 Suspension Arm
If your desk just so happens to be big enough and thick enough to overshadow your house, finding a microphone stand to match is a pain. Sure, all that space could accommodate a desktop microphone stand, but soon enough the desk becomes far too cluttered. The Tonor T30 Suspension Arm solves that problem, and then some.
.jpg)
The Tonor T30 Suspension Arm is an oversized, premium version of the Tonor T20, featuring a much longer reach. Its maximum vertical length reaches 940mm, making it the ideal companion for very large desks. This is especially true given the fact that the clamp featured on the suspension arm also fits desks as thick as 2.4 inches.
What the Tonor T30 Suspension Arm does best is being one tough piece of equipment. Thanks to strong steel and super-tension springs, the load capacity on the suspension arm is fantastic. At max, the T30 easily handles 4.4 pounds, so if you typically use heavy microphones, the Tonor T30 is for you.
3. Samson MD5
Whether you’re new to streaming or you’re just concerned about budget, the highly durable Samson MD5 Desktop Microphone Stand brings simple functionality without soaking up too much surface real estate.
Thanks to a wide 6.25-inch weighted metal base, the Samson MD5 provides excellent stability. So long as you have a 5/8-inch threaded attachment, the microphone stand can handle a wide variety of light and heavy microphones.
If you hate fiddling with tech, it’s important to note that you don’t need to make big sweeping adjustments to the Samson MD5. It merely sits in front of you, positioned perfectly to capture your voice in a discreet fashion.
4. Luling Arts Microphone Arm
For those looking for a microphone stand that’s a bit on the shorter end, the Luling Arts Microphone Arm is a worthy solution. It also takes out all the guesswork of figuring out everything you need to get your streaming setup running
At 27.6 inches in length, the Luling Arts Microphone Arm is perfectly suited for shorter desks, and given that the clamp can reach as wide as 2.16 inches, it’s a great option for thicker desks, too. More importantly, this microphone arm has a great range of adjustability at the base and the joins, along with 360 degrees of swivel.
The Luling Arts Microphone Arm’s durability cannot be overlooked, either. Not only does its strong steel build support microphones weighing up to 4.4 pounds, but it gives it some serious longevity.
5. InnoGear Adjustable Microphone Stand
Having a microphone stand placed directly in front of you can be rather distracting, not to mention the possibility of accidentally knocking it to the floor. You can avoid that altogether with the InnoGear Adjustable Microphone Stand.
At first glance, the InnoGear Adjustable Microphone Stand looks as if it would topple easily, but that’s not the case whatsoever. The counterweight is so strong, and the heavy-duty base so sturdy, the stand can easily handle microphones weighing as much as 4.4 pounds.
Outside of being highly durable, the InnoGear Adjustable Microphone Stand features a bevy of welcomed traits to make the streaming life easier. There are two clips for solid cable management, along with a clutch to adjust the height and length for the most comfortable positioning.
6. On-Stage DS7200QRB
Take a large, round mic stand, shrink it down to a handheld size, and what you get is the delightful little On-Stage DS7200QRB Microphone Stand. While it may not be brimming with features, its clean design and small form profile make it an excellent companion if functionality is your only concern.
For starters, the On-Stage DS7200QRB Microphone Stand is incredibly easy to set up. Simply twist the shaft into place, topped with your choice of microphone, and you’re ready to go. What’s quite handy is the quick-release clutch that gives you 9.5 to 16 inches of adjustable height.
The On-Stage DS7200QRB Microphone Stand’s MVP is the surprisingly sturdy 6-inch sand-cast base weighing 2.9 pounds, giving it all the heft and diameter it needs to accommodate heavier microphones. To top it off, the base has five rubber feet that not only reduce slipping but prevent damage to the surface of your desk.
7. Rode Tripod Mini Stand
If round bases don’t appeal to you and prefer the aesthetic of a tripod, look no further than the well-balanced Rode Tripod Mini Stand. Not only are the legs well-built, but the mic stand also doesn’t suffer from awkward positioning.
With compact mic stands, you’re stuck between two choices: take it apart after use or leave it on your desk, taking up valuable space. Due to the Rode Tripod Mini Stand’s collapsible tripod design, it can be naturally in front of your face for the best audio quality, then folded and stored when you're finished.
What’s arguably the best aspect of the Rode Tripod Mini Stand is its 1/4 and 3/8-inch threading. While you should avoid using hefty microphones, having access to both types of threading exponentially expands the library of microphones you can choose from. In other words: if you switch mics often, the Rode Tripod Mini Stand won’t let you down.
Q: What Should I Look For In a Microphone Stand?
Your current setup can be a huge determining factor as to what the best microphone stand is best for you, but the maximum load should always be addressed first.
Here's a scenario: Your microphone weighs 5 lbs., which is a very heavy microphone, but the microphone stand you've chosen has a maximum capacity of 4.4 lbs. In this scenario, your microphone has exceeded the maximum load, which can and will cause stability problems and potentially damage your microphone.
Outside of weight, it comes down to preference. Do you like having a microphone stand that's out of the way? Go with a suspension arm. Do you have a large desk and can spare the space? In that case, a desktop microphone stand may work best for you.
Q: Do I Need A Microphone Stand For Streaming?
If you aren't using a headset to capture audio, then yes.
Microphones are normally built without a stand, requiring some sort of contraption to keep them lifted and away from the surface of your desk. It can't just be left rolling around on your desk, capturing all sorts of scraping and horrible audio. More importantly, microphone stands can be fitted with pop filters and shock mounts to help clean up audio, exponentially improving the quality of your stream.
Q: Will Any Microphone Work With Any Microphone Stand?
Every microphone has specific threading; for example 1/4, 3/8, 5/8, and so on. Threading determines whether your microphone will screw onto the microphone stand or not. If they don't match, the stand and mic aren't compatible.
Thankfully, most microphone stands come with an adapter, greatly expanding the library of microphones it can work with.
Post a Comment