Blackened Gold, Silver Cleaning and Polishing Methods

Polishing and cleaning methods, as jewelry such as gold, silver or pearl, which is one of the accessories that women love to use, will darken after a while.

Dishwashing Liquid

• 2 tablespoons of dishwashing liquid;
• Micro fiber cloth;
• 5 glasses of water.

Since your jewelry made of pure materials such as gold or silver will darken after continuous use, you can apply it as a reliable method at home to clean it.You can also consider it as a cleaning method without damaging your jewelry. You must first put warm water in a bowl. You need to make sure that the temperature of the water is always warm enough not to burn the hand. You need to add 2 tablespoons of dish soap to it. All your jewelry should be mixed and foamed, and you need to leave it for 30 minutes. It is recommended to mix your jewelry every few minutes. A woolen cloth should be laid on the table and you should put your jewelry, which you put in the water you prepared with dishwashing liquid, on the cloth that you have laid out, and ensure that the excess water comes out.

Care should be taken as there will be a possibility of entanglement as you will mix your jewelry such as chains when put in water.

You need to wipe your jewelry that you put on the cloth and get the excess water from. It is recommended that you take the microfiber cloth in your hand and wipe the jewelry one by one and with gentle movements. You have to press a little, but while wiping, you need to wipe with slow movements. This method will be an effective method for cleaning both gold and blackened silver. Since silver will darken more frequently, you will notice that your silver and gold are as bright as the first day when you wash and wipe your silver with the water you have prepared with dish soap every month.

Salt and Aluminum Foil

• 2 tablespoons of salt;
• Aluminium foil;
• That;
• Cloth.

It is known as one of the most effective methods to make your blackened jewelry shine again.This method will be used for jewelry such as silver or pearls. It should not be used to clean or brighten fake jewelry that will be made for pure and natural jewelry. The water should always be warm enough not to burn your hands. If it is too hot or too cold, the salt will not melt, so it will not be useful. First of all, you should put 2 tablespoons of salt in warm water. If you have rock salt at home, it will be more effective, and you can also add table salt. In order for the salt you put in the warm water in the container to dissolve, it is recommended to mix it first and prepare the solution by dissolving the salt. Then, very small holes should be made on the aluminum foil and the jewelry should be put inside and closed.It is recommended to leave a large enough area for water to enter.

You need to keep it in the solution you have prepared for half an hour. Then, the jewelry you have wrapped in aluminum foil from the water is removed and opened. The darkened areas should be especially pressed and wiped with the cloth with micro fiber feature, along with the water filtration inside. Many of your jewelry will regain their former shine with this method.

 Toothpaste

• 1 tablespoon of toothpaste;
• 1 teaspoon of baking soda;
• Toothbrush;
• Cloth;
• That.

If you have difficulty in erasing the blackness between your jewelry, which is mostly chain or watch band, you can use this method with confidence.First of all, we would like to explain the process to you. You should mix toothpaste and baking soda in a glass bowl. When it comes to a solid paste consistency, it is recommended to add a very small amount of water and bring it to a fluid paste consistency. After performing this process, the first thing you will do is to apply a little bit of the paste you have prepared on the toothbrush and when you wipe it with a cloth, you should choose to reach the parts that you cannot reach with the cloth when you cannot polish the intermediate part of the jewelry. You should dip it into the paste along with the toothbrush and start brushing the jewellery. After brushing for a few minutes, leave it for 15 minutes. Then you should make salt water, put it in the water, wait for 5 more minutes, take it out and check the dark.

If it does not go away, it should be wiped with a micro fiber cloth after brushing with a little more paste.

Baby Shampoo

• 1 tablespoon of baby shampoo;
• Warm water;
• Cloth.

It is the method you will use to polish and clean your precious stones. You cannot use the mixture you will prepare with dish soap for precious stones. Because it will cause the gemstones to deform. For this reason, baby shampoo is recommended due to its very low pH value. Baby shampoo should be put in warm water and mixed. Then you should add your precious stones and mix them and leave them for half an hour. This is how your gemstones are cleaned with the best method. For cleaning, you can start using it by wiping it with a micro fiber cloth and drying it. Since it is one of the best cleaning methods, you can use it with confidence.