How Should Jewelry Cleaning and Care Be?

How Should Jewelry Cleaning and Care Be?

By cleaning and maintaining your jewelry, you can ensure that it does not darken and does not change its color. Jewelry care and cleaning.

Vinegar

• 1 cup of white vinegar;
• That;
• cloth .

You can use vinegar to clean all kinds of jewellery.In order to clean your darkened or dulled jewellery, first of all, the jewelery must be wiped and the first cleaning step must be done. Afterwards, throw all your jewelry into the vinegar that you slightly heated in a bowl. You have to wait for 3 hours. If you are going to clean a type of jewelry that will mingle with each other, then you should tie all your long jewelry together with a string and put it in the vinegar in this way to prevent it from getting tangled in what you need to do. All your jewelry in vinegar should be mixed at regular intervals during the time it is in the vinegar. After 3 hours of waiting, you need to remove it and rinse with plenty of water.

But the process will not end here and you need to dry all the jewelry with a dry cloth without leaving any wet parts. With this process, you will have a jewelry as bright as the first day you bought it.

Baking powder

• 2 tablespoons of baking powder;
• 1 glass of vinegar;
• That;
• Cloth.

It is effective in cleaning very dirty jewelry. It will also play an important role in cleaning white gold or silver colored jewelery with baking soda. For this reason, if you want to shine your jewelry without getting too dirty, you will always be able to perform the cleaning process with the above materials.

It is quite easy to prepare and apply the mixture. For this process, put pure white vinegar in a bowl. Colored nits cause damage to your jewellery. To avoid this situation, you should definitely use white vinegar.

Vinegar should be heated very slightly on the stove and mix by adding 2 tablespoons of baking soda into it. Thanks to warm vinegar, baking soda will dissolve more easily. You should put all your jewelery you want to wash and shine in this mixture and wait for a while for it to be cleaned. If you have jewelry that is not very dirty, you can keep it in this mixture for 1 hour, and if you have dirty jewelry, up to 3 hours.

After removing, a clean cloth should be dipped in this water and wipe your jewelry. Afterwards, it should be rinsed under tap water and carefully wiped with a dry cloth to dry all areas.

Tea Tree Oil and Soda

• 1 tablespoon of tea tree oil;
• 2 tablespoons of soda;
• 1 teaspoon of vinegar;
• That;
• Cloth;
• Brush.

Another method to clean blackened jewelry is that you will do with the above materials and if you do not want your jewelry to darken, then with this method, you will easily be able to shine your jewelry. People who are bothered by the darkening of silver or gold after use, first of all, you should add tea tree oil and soda to the vinegar and mix it. Mix this mixture until it reaches a paste-like consistency so that the soda can restore whitening and darkened areas. Since it will be like a liquid paste, put all your jewelry in this mixture and mix it at regular intervals. In order for the jewelry to return to its original state, you should remove your jewelry one by one that you have kept for 3 hours and mixed in between, and you should brush even the corners or inner parts with the brush.But you should not forget that the brush must have hard bristles.

After brushing, you will notice that the darkening has gone by itself. 

Aluminum Foil and Vinegar

• 1 glass bowl;
• Aluminium foil;
• white vinegar;
• That;
• Cloth.

This method, which you prefer for cleaning all kinds of light and dark jewelry, will give very good results. In case of cleaning with aluminum foil, it will absorb the dirt like a magnet and thus the jewelry will be cleaned sufficiently.  It should be filled with white vinegar. It would be appropriate to explain why you should use white vinegar as follows. It is not recommended as it will damage your jewelery due to the colors of other vinegars.

Put all the jewelry you want to clean in it and mix it every 10 minutes. Depending on the dirt, you need to wait for at least 1 hour to maximum 3 hours. Although it has been cleaned when you take it out, wash it so that the dirt comes out. If there is a situation such as the dirt not coming out and sticking to your jewelry even though you wash it, the softened dirt will come out immediately after brushing.  But remember that jewelry that has not been cleaned for many years will be very dirty, so it is more difficult to clean. You need to give importance to cleaning at least twice a year for easy cleaning.