Descaling Methods and Materials to be Used in Iron

Iron is one of the small household appliances we use most in our house. Over time, lime accumulates in the steel base and its performance decreases. So how is lime removed from the iron? Here are the tips ...

Lime Build-up in Iron

Lime is formed by the accumulation of hard minerals in the water on surfaces that come into contact with water. Hard water is usually the water flowing from the fountain and filling the ironing tank with these water causes the minerals in it to turn into a lime layer during steam extraction. In order to prevent this occurrence, it will be effective to choose drinking water in the ironing tank.

Lime layers are formed especially on the metal. If you do not clean this thickening layer over time, the inner chamber of the iron will be completely covered and the holes where steam should escape will be blocked.

If you are wondering how to clean the calc-holding iron, you are at the right place. If we cannot prevent the formation of lime, we should develop solutions and we should not neglect the regular maintenance of our iron. Otherwise, the pores will be clogged and our iron will lose its performance day by day.

Eliminating Lime Buildup

First of all, you should know that the iron is a household appliance that requires regular maintenance. It will be very easy to prevent this occurrence when you do regular maintenance and repair. If these layers continue to form despite regular maintenance and repair, it is useful to change the water you use. Otherwise, this formation will take over the reservoir of the iron and will fail to perform its steam extraction function.

The biggest enemy of this layer is acidic solutions. You can destroy these layers with high acidic solutions. These solutions will not harm metal surfaces. However, if the right materials are not used, your iron will have a shorter life. When you maintain weekly maintenance, it is very unlikely that you will encounter such problems. So how do we remove these stains? Here are the practical methods and the materials you will use ...

Baking powder

This substance, which you can easily use for regular maintenance of your iron, is a very effective solvent. Before applying, fill the water tank of the iron in a ratio of 3/4. Then make a paste-like mixture with baking soda and water. Spread this mixture with your hand on the bottom base of the iron to cover the holes. Then let it sit for a while and clean the pores with cotton swabs. Turn on the iron and turn on the steam setting fully. As the iron starts to steam, it will also melt the sheets and move them out of the pores. Then it will be enough to wipe the base with a wet cloth.

White Vinegar

If the layer inside your iron is very thick, this method will work for you. Before applying, completely empty the water tank. Add a cup of white vinegar to the tank you emptied. After adding a cup of drinking water on it, you can start your iron. You will witness that the formed layers flow through the pores. Another way to clean it with vinegar is a mixture of salt and vinegar. Add a cup of salt in two cups of white vinegar and put it on the stove. Boil until the salt dissolves. Then let the mixture cool. Then, apply this mixture to its base using a cloth. This is the most effective method for stains on the base.

Hydrogen peroxide

If you need a solution for thicker layers, this method will help you. If other methods did not work, you can reach a final result with this method and say goodbye to lime layers. All you have to do is mix a cup of hydrogen peroxide with a cup of water and put it in the water reservoir of the iron. Then you can start the iron and say goodbye to the limescale layers.