If you have a house with a garden and you have a suitable area to build a pool, you can make a swimming pool and have a functional and decorative product. But having a pool is a troublesome and costly job, you should not overlook it. With a swimming pool in your garden, you can do sports , relax by the pool, sunbathe and tan, and have fun times. The fineness of swimming pools and tricks about swimming pools are quite high. If we do not regularly maintain the swimming pool, it can threaten our health. Because swimming pools can turn into a nest of germs if they are not maintained.
Which Materials Should We Construct the Swimming Pool?
Fiberglass materials are a bathtub material that is placed in a previously prepared pit in a single piece. The surface material, fiberglass, has an algae-repellent feature. However, if it is a quality material, it must be renewed over time. Plaster materials used in concrete coatings wear and tear over the years. Generally, this coating process needs to be done again after it has been used for a very long time. Aggregate is formed as a result of breaking and sieving a hard stone up to 100 millimeters in size. The thing called grain size is pieces of rock. This coating is much better and quality than other materials, so it should be used in pool construction. Tile coatings will be much more ideal products for your swimming pool compared to other coating materials.
How Should Swimming Pool Maintenance Be Done?
In order to do pool maintenance, you should devote 4 to 8 hours a week to this job. You can do your pool maintenance by using care products such as water test kit, leaf sweeper, vacuum cleaner and brushes. Apart from this, some cleaning agents and chemicals are also required for pool maintenance. Algae formation in the pond is a very common problem. There are two methods to remove algae in the pool bottom. The first is to destroy algae by using a lot of chemicals. The second way is to change the pool water the moment you see the little black stain.
Winter Preparation for Pools
If swimming pools are open, they can be preferred in summer and are not used in autumn and winter. However, you should clean the pool, which will not be used for months, before you go on vacation. Antifreezes to be placed in pipes and inlets to prevent freezing of water will allow you to spend the winter comfortably. In the summer, this heating system is turned off, thus saving money. Filter systems help to clean the water continuously. However, a wrong adjustment during filtration leads to an increase in fouling organisms in the pool. In order to control these types of organisms, instruments that measure the quality of the water should definitely be used. In order to prevent children or animals from falling during the winter months, the upper parts of the pools should definitely be closed for safety precautions. Automatic cover systems are convenient in this regard.
Swimming Pool Tips
Before applying the precipitator, you should definitely measure the PH value of the water. The ideal value of the water should be in the range 6.8-7.2. If you want to apply shock chlorination, the PH value should be in the range of 7.0-7.4. Dose at least 4 times the average daily dosage for shocking. If you measure the PH value immediately after shock, you will get a misleading result. Do not enter or use the pool for at least 12 hours after blasting. You have to empty the pool while cleaning the pool. When cleaning, it is necessary to mix 2.5 kg of algae killer water into a 100-ton pool and apply it to the entire surface of the pool. When large amounts of algae are used, foaming occurs in the water. Algae medicine does not dissolve in water like chlorine, so it is necessary to add fresh water to the pool to reduce its density.
Post a Comment